Search for Manual Wheelchairs
EZ Lock interface brackets are available for many different manual wheelchairs. Most manual wheelchairs with a round tube frame assembly may be adapted for use with the EZ Lock Docking system. Be prepared to supply measurements of the tubing diameter and lowest frame height.
Be advised that accessories such as tilt seating, ventilator trays, foot actuated wheel locks, etc., may interfere or prevent interface bracket installation.
Wheelchairs commonly referred to as a “sports” or "open frame" wheelchairs (i.e. low backrest, one-piece footrest, no lower frame-rail) are generally not compatible.
Pediatric strollers and transport wheelchairs are usually not compatible with the EZ Lock system.
There must be a minimum of 3 inches ground clearance beneath entire length of the wheelchair.
Click on one of the tabs below to find your wheelchair.
How to measure the wheelchair
To determine the appropriate bracket: measure the outside tubing diameter (usually 1 inch or 7/8 inch) and the height of the lowest side frame-rail (horizontal; running front to back) from the floor.
You may download the Manual Wheelchair Worksheet to record your measurements.
The standard interface bracket kit is based on a 20 inch seat width and may need to be trimmed to size. For wheelchairs with a seat width wider than 20 inches you must specify the width (24 inches is the maximum allowable).